Grips for HK HK45c



90 days

Order in the next 11 hours for Tuesday shipping!

TALON Grips for HK45c model. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and high coverage on the backstrap. This grip has a graphic cutout for the HK45 emblem on the firearm. This grip will fit both backstrap sizes. FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

Great fit definitely ads to handling ability. Easy installation and seems to be secure after 3 range trips and daily duty wear for about a month.

Cons: Can't get the grip back strap off in current form. Also personally would like to see the grip more rubber like.

My HK 45c has insufficient knurling causing me to adjust my grip after a few rounds. The Talon grip was easy to install, looks great and works well. My groupings are much tighter and I do not have to readjust my hold for a full magazine. Well worth the price - excellent product.

Easy and awesome.

Wow! Really improved the feel of the HK45C in the hand.

Luv the grips. Competing in IDPA my times and accuracy have been helped by the grip confidence Talon provides.

Easy to install and very good quality. Recommended to my friends

the stock grip on my HK 45c proved to be a little the other guns that needed a little extra "tack" the Talon rubber made the difference...I have even purchased the Talon rubber material in sheets to make my own grip panels on guns long out of production....perfect...thanks

Adds a lot of traction to a previously slippery grip. I went with the rubberized version and liked it.

Awesome. Added much needed grip to the slick HK45c. Fit well. Would do again.

The fit was superb as is the quality of the material. An excellent product worthy of such a fine firearm!

I was disappointed with the grip feel of my new HK45c. Being a compact .45, the recoil was noticeable. The factory polymer grips did not provide enough texture to maintain a firm hold. I purchased the granulate Talon grips and couldn't be more pleased. The firearm is now extremely comfortable and secure in the hand, handles recoil well and as a result I am able to fire it much more accurately. On top of that it was easy to install and since they are customized for your specific handgun, they look great.

They work for what they're designed to do, but the adhesive was terrible. Even after setting the grips properly, they came off after a couple of days - this may be related to the high heat in Arizona, however.

I would rate this somewhere between Average and Very Good. The grips are OK and function a lot better than the original stock, but I would have liked a more rubbery feel. Compared to a Houge Handall, this grip looks nicer and is not as bulky, but does not provide as good of a purchase on the pistol and is more expensive ($18 vs $8).

Perfect fit great product

They don't stay put as well as they should. Definitely not a good value. If they were half the price I would feel OK replacing them once a year. Going to try skateboard tape next time.

Night and day. A must have for the HK45c if you're wanting more traction and are not a fan of stippling. A no brainer for me.

The granular black grips provide phenomenal hand traction, substantially enhancing shooting proficiency (accuracy + speed) and handling surety. They are very durable (impervious to strong cleaning solvents) and precisely contour the gun's grip. Talon's service has always been top-notch too. I normally recommend Talon Grips to my clients.

-NRA Certified Pistol Instructor; Illinois Concealed Carry Firearms Instructor

The granular black grips provide phenomenal hand traction, substantially enhancing shooting proficiency (accuracy + speed) and handling surety. They are very durable (impervious to strong cleaning solvents) and precisely contour the gun's grip. Talon's service has always been top-notch too. I normally recommend Talon Grips to my clients.

-NRA Certified Pistol Instructor; Illinois Concealed Carry Firearms Instructor

I originally ordered the sandpaper grips and was amazed at how well it really locked the gun into my hand. This made the recoil feel much more controllable. The only problem was that carrying concealed became painful as the grips were very abrasive against the skin so I ordered the rubberized version instead. This is a good compromise. It certainly provides more traction than the factory texture, albeit not as good as the sandpaper, however it does not hurt the skin and is comfortable to carry all day.

The perfect version would be a half-and-half style Talon Grip where the left side was rubberized and the front, back, and ride side were all sandpaper. I'm sure that's not possible, but I'm just thinking out lout.

If you're going to use it for concealed carry, get the rubber version. If it will be for range use or open carry, the sandpaper version is excellent!

I love Talon Grip enhancement products, I ordered the rubber variety for my Heckler & Koch HK45C and they arrived extremely fast which was just great. The Talon grips greatly enhanced my purchase on the HK45C, I chose the rubber variety to maintain comfort while concealing the pistol in an IWB holster where the grips would run my side here and there, and I am happy with them, I do wish to get a set of the granular variety for my Glock 23 to try those out because I have found the rubber variety may not be enough when my hands are sweaty or the pistol grip may he sweaty from my side. So next I will try the granular and might swap out the rubber if I like the granular more. Keep up the great work and please donate to pro gun lobbyist groups to defend our God given right to self defense, and the right to have the proper tools to do it without stooping to the level of a savage and fighting with blunt objects or our bare hands. -Eric W. Oregon city, Oregon.

Fits perfectly, feels comfortable, and gets rid of the Hogue's bulk. Simply awesome.

Grips are nothing short of excellent! They made a huge difference in my ability to get a solid grip on my HK45ct..Best of all, If, down the road, I decide I want to remove them, they are easily removed. I liked these so much I bought another set for my P-2000!

I highly value talon granulate gun grips. The rubber grip is not grippy enough. They are slippery.

Saw an M&P with this grip at the range and really liked the fit and feel, so I ordered the rubberized grips for all my HK's. USP Full 40S&W, 45C, P2000SK 40S&W and P30 9mm.
I previously had Hogue rubber slip on but they got slick when hands for sweaty in hot months. Yet the Talon has almost a tacky feeling that seems to handle humidity and perpetration much better. All fit perfectly and were easily installed. I took it slow, fit, fit and re-fit then installed. I found that by scoring the paper covering the adhesive allowed me to safely fit/install one side at a time in a controlled manner. Talon service is top notch and delivery was super fast I ordered on Monday and they were in my mail box on Wednesday. Will definitely be an addition to all firearm future purchases.

It's a perfect product. The grip is solid but not abrasive to the hands, and provides enough grip that your hand does not move while shooting. If you are a re-gripper like I am, this product will correct that. Installation is easy. I'll be putting these on all my firearms

You need to make all carry that will be your tradition . I own justo bout all the h&k'sI think every he pistol needs one of your talon wraparound pistol p

Material and workmanship are excellent. Also makes the grip feel much more secure. The reason for a "very good" rather than an "excellent" is that it would have been nice if the grip was made in two parts to allow for removing the back strap. The sides and front should be one piece with a smaller piece for separate for the back-strap that also leaves the lanyard hole open. I modified mine to accomplish this during installation.

Perfect fit as always. Adds no noticeable width to the grip and is very comfortable. I have these grips on every polymer framed pistol I have. Great product

Product Reviewed : Rubber Textured.Very easy install. These grips make a huge improvement on the feel of the handgun. My only "complaint" with the HK45C was the rather slick grip texture. That complaint is now fixed.I highly recommend these grips.

Fantastic grips. I loved my 45c before and these made it perfect. I have a set for all my polymer framed handguns.Great product and a great company to deal with.

Fantastic! Really improved the grip, like talons do for all my pistols! You can't get a better product at any price.