Beretta Pico

Grips for Beretta Pico



90 days

Order in the next 24 hours for Monday shipping!

TALON Grips for Beretta Pico model. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and high coverage on the backstrap. This grip has graphic cutout for the Beretta emblem on each side of the firearm. Extended magazine grips are available for this model (sold separately). FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

I LOVE these grips. I have them on every handgun I own. This last order I ordered the wrong grip material and they exchanged it with no problem. I sent them a check to cover shipping etc and they sent it backun cashed. EXCELLENT customer service!

After buying and installing talon grips on the pico, grip and usability are greatly improved, this is a thin, very thin..pistol, and the talon grip gives it just enough , something,, to make it controllable , if you own one, buy the talon grip for it,...

Made Pico much easier to grip.

Great upgrade for the Beretta Pico, excellent fit and finish,very positive grip with this small weapon, these should come with the Pico standard, a must have..AAA +++...

Grips worked exactly as advertised. Very satisfied .

As advertised. Would be even better if material were a little thicker. That might absorb some recoil, especially on such a small firearm.

The Pico is tiny. It has a good trigger and good sights. With the Talon grips it can be locked into a secure hold. Works great!

Great product, easy to install. Really improved the grip on the small Beretta Pico.

Fits perfect. Makes handling weapon a lot easier.

Easy to apply, perfect fit. Noticeable improvement in grip on this tiny pocket gun and corresponding improvement at the range.

One for my Beretta Pico, one for my Beretta Nano, one for my CZ P9, and one for my FN five seven. Pretty self explanatory. An excellent product. I personally use the rubberized version on all of them. Many have been one for more than a year. If there is one available for any gun I own I will buy it.

Very happy with the grips, thank you!

The Beretta Pico is a great CCW pistol but a drawback is it's slippery grips, especially with such a small weapon. Talon's overlay is the answer. Problems resolved with this high quality grip overlay that was easy to install. Could not be happier.

Not a luxury - a necessity!

Perfect fit. Talon grips greatly enhanced my confidence that I can actually draw the Pico from a pocket holster with a realistic grip on this tiny pistol. Talon grips create the tactile feel necessary for drawing the Pico with a cold hand or sweaty hand, etc. Pico should come standard with Talon grips as the factory grip is too smooth to be effective under stress.

The Pico grip is not the easiest grip to hold on to because it is so small. Couple that with the fact the grip is very smooth, even what I would call slippery, and the problem is magnified. Talon grips helps in both departments tremendously. Beretta should send the grips with the gun.

This is my second said of Talon Grips. The first set were for a Beretta Nano. The second set were for the Beretta Pico. They really help you hold on to that small grip. Recommend highly.

Ok ok. I'm a guy... and I own a pico. I truly never thought that I would ever own a gun of that size or lack of a real gun size. The size of the gun is a valid reason to need the talon grips though. I had previously bought a rubberized set for my EDC gun and I liked how much they helped grip the polymer frame. Well since my EDC pistol is about twice the size of the pico, I thought I would step up the grip to the sandpaper texture to have a better grip on the little thing. Well to my delight, it was a great choice. It grips like a champ and has allowed me to be precise when shooting 15 yards out. In my opinion, if you have a Pico, you need these grips. Go get yours, you won't regret it

Perfect fit and finish. Feels great in hand.
Thank you Talon for great products!

I have the rubber grips on a full size Springfield XD and loved them. Installed another set on a new Beretta Pico and it made the grip on this very small and smooth frame GREAT! I would consider the Talon grip a must for the Pico! Easy to install and fit was perfect. Does not feel nor look like an aftermarket product.

Looks great, fits perfectly and adds and extra bit of control over the weapon even if your hands do not tend to get sweaty.

I agree with all above. The Pico is a much better handling little firearm with the Talon grips. What a great difference.

The rubberized self-adhesive Talon grip is a plus for my little PICO. Adds no weight or bulk, Enables a better grip for draw, even with wet or sweaty hands. Especially better when using the small, non-extended magazine. Just read and follow instructions for applying. Good stuff.

the Talon grips I received from you are great. I now truely do have a grip on the berretta pico.

Great addition to the Berreta Pico, allows you to get a grip on the slippery little sucker! Very easy to install and looks factory.

Great fit and easy to install, really added to my being able to control the recoil.

Wow.. what a difference. I purchased the Pico because of it's slim design and light weight. Its a great little gun.. but man that frame is slick.. I've got large hands and I can only get my middle finger around the grip with the flush magazine.
I was really surprised just how much better my grip is with these Talon Grips.. (Rubber textured.) Locks in nice and tight and I don't feel like its going to jump out of my hands. This is my first set but definitely not my last.

Grips made a big difference in the way this weapon feels in my hand, much more secure!

I am very satisfied with my Talon grip which added needed texture to my Beretta Pico frame. I recommend it to everyone.

Got a great hand written "thank you" on the invoice. The kind folks at Talon shipped with the extended magazine grip even though I did not order it. The grips fit perfectly. I have had the Talon grips installed on my Pico for 60 days. I carry that pistol in a IWB or pocket holster every single day. Their is no evidence of separation the grips are bonded extremely well. If you own a Pico you know this little bugger is slick and hard to get a good grip of. Not after I installed these grips, I have gained confidence in my grip with these, making it is so much better to shoot now. The only negative is the granulated grip is so good that if your holster does not keep the entire pistol grip separated from your skin it will rub your bare skin raw.

Talon Grips are excellent. Small pocket firearms can be difficult to control, but your grips (I use the rubber ones) make the pistol much easier to securely hold. Accuracy improved as well. !0 yard 5 shot groups shrank from about 8" to under 5". Part of that may be simply becoming more comfortable with a new gun, but I credit your grip as well. Thanks for a good product, Rick

What a dramatic difference! It's like having a new gun. Highly recommended. Just take your time cleaning the frame and installing the grips. Would be a worthwhile upgrade at twice the price. Thanks for a great product.

The Pico is small; the grip at best gives me room for two fingers. Talon grip significantly improved feel and control.

Great grip! It really helps me keep a grip on my Pico. With a small pocket pistol it's great to have some extra traction. It fits perfect and is easy to apply.

nice grips,,,fit perfectly

Excellent product! A must for every polymer gun I own!

Pico feels better in my hand with rubber grips

Talon Grips are a must on these diminutive pocket guns. A whole new level of control and piece of mind that the gun will actually stay in your hand, especially when shooting +P defensive rounds. With little checkering/grip-points on the Pico, they have a tendency to drift in your hand. With the grips installed, it just stays put. Any more secure, and you'd need to superglue it to your palm. Excellent product, great service and precision fit. A must have upgrade to any gun they have product for.