Click for Talon 360 ViewTALON Grips for HK P2000 (Rubber-Black)

Grips for Heckler & Koch P2000



90 days

Order in the next 27 hours for Monday shipping!

TALON Grips for HK P2000 model fits both small and medium backstrap. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and high coverage on the backstrap. This grip has a graphic cutout for the P2000 emblem on the firearm. This grip fits the small or medium backstrap only. Due to the material difference on the large and extra large backstrap no grip is available for those sizes. FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

Grip is solid, fits great, sticks great, no peeling, looks great - Talon has a great product! Which is also why 4/5 stars is maybe disingenuous. The sand grit is really abrasive. I've carried my P2000 in a Crossbreed super-tuck for 6 months and sanded down the "skin side" of the grip. Skin has been fine but it still sticks to my shirt and I'm constantly pulling it away from the grip. Sure, I could sand down the "shirt side" of the grip too, but the granulated grit makes the grip.

I liked the grips but it did not improve my grip as much as I hoped for. I purchased both kahr pm 9 and HK p 2000 in rubber form. Next time I will try granulated type. Will try again.

Very good fit and easy to put on. I get a lot of likes on those grips when we’re out shooting. I will be getting more and I really like the free shipping. Your lucky,Love CO.

Great fit and feel.

Great grips!!!

have purchased several of the granulated grips for my H &K P2000 due to my sweaty hands and the grips allowing positive Conroe of the pistol. Duty carry and banging the grip on the seat belt, center console, etc leads to the grip needing replacement maybe once a year or so. Trying the rubber grip this time around.

I installed my grip different. I cut the right side from the back strap. Carefully installed it and bent the portion that goes on the front strap on. Then I installed the left side grip after cutting the back strap portion off. Once both grip sides were on I next did the back strap. Heated the entire installation wit a blow dryer twice. Looks good and fits well.

Does exactly as advertised. Goof fitment. Prompt shipping.

Sticks on pretty well and provides a better grip BUT.... The product did not fit right at all. I had to do some cutting and customizing on my own. I DO NOT RECOMMEND TALON GRIPS FOR THIS SPECIFIC WEAPON — HK P2000.

Very easy to apply and holds on after multiple cleanings with and trips to the range.

So far the grips perform well. I modified the grip because I use the large backstrap for the p2000. I was able to cut and place where I wanted. I ordered these knowing I would have to do that. The only reason I gave 4 stars is because I would like the grips to be more aggressive.

My first grip got damaged during the course of my duties so I ordered 3 more. One for me and two for other guys at my agency to try out. Can't recommend these grips enough!

Great upgrade to the P2000 grip. The plain grip of the P2000 is way to slick for my sweaty hands and these grips help ALOT getting a good grip on the pistol. After a while, I notice hand gunk tends to build up on the grip and I have to scrub em with a dry tooth brush and that tends to work for getting them grippy again.

These rubber grips on my P2000sk brought my gun back to life! The grips make the gun much more pleasurable to shoot and get on target. I actually enjoy carrying this gun once again as my EDC, while concealed. Thank you Talon Grips!

I first ordered the moss color but didn't like the look on black gun. Happy with the black rubber.Thanks

Great feel and looks cool

Very good grip

The lack of accessory support for H&K P2000 pistols is the reason I checked out Talon Grips since they had it available for this model. Since, I purchased it for every pistol I own! Thanks TG!!

Love the rubber, I have them on both my Glock 19 and 43. Love them on the P2000 but with one note. Maybe the standard size for small and med. backs and a larger size for large and xl backs. Overall no complaints what-so-ever. For the money probably the best money I ever spent.

I had better grouping first time at the range with these, great grip!

I did not think I could love my HK P2000 more until I installed the perfectly fitted Talon rubberized grip. Easy, intuitive self installation was soon rewarded with a rock solid purchase between my hand and pistol. Before the Talon grip, my small hands would have a hard time clamping down on the sides of the grip. The P2000 has great stimpling fore and aft but slippery polymer sides. With the Talon rubberized grips, my pistol and hand meld into one. Shooting steel targets outdoors from my holster, I experienced a confidence that I did not have before the Talon grip. Even with a not so perfect grip coming out of the holster, I could still send accurate rounds down range without having to readjust my grip mid target acquisition. Great product. American made. Simply perfect.

The standard texture for the P2000 is decent. Paired up with the standard magazine basepad with the ledge also helps with securing the grip, but without actual texture, still not acceptable for an overall very nice compact carry gun. Talon Grip texture was the quick solution to the overall slickness of the standard frame of the P2000. Must have if you intend to use this gun over a prolonged period of time, especially when shooting hotter ammo.

It feels like I have a better grip with the Talon. I have no issues so far. It came highly recommended by a coworker and I'm glad I purchase one. Shipping was fast.

Love the talon grips. Provides a great surface for your grip without traditional stippling. This is my second talon grip and probably not my last. Great product, great service.

I didn't see an option to choose the grip size of my pistol and frankly didn't think about it until I went to apply it. Ended up having to cut the Talon Grip in order for it to fit. Seems to stick fine to the rubber, overall I'm pleased.

I ordered the Granulated grips for the P2000, and I've had them on for about 2 weeks now. I'm pretty impressed with them so far. The installation was a breeze and fit perfectly with the medium backstrap. The texture is very aggressive, which I like, because in my line of work, I'm always wearing gloves. And without gloves, the texture eliminates problems with dry-slick hands or wet sweaty hands. I will be buying sets for my personal weapons. A+ product!

Perfect Fit! Makes for a much improved grip. I recommend Talon Grips for every one and every firearm! I now have 4, love them

Perfect fit on the p-2000. Quick shipping and great service.

Great grips for weapons that won't be used much or duty carry. After a week of having these grips on I have already worn down one corner and the grips are starting to come off.

Granulate grips on H&K P2000 work really well. Helps me shoot better. Order arrived really fast too. I have become a Talon fan!

Perfect! I own 10 or more of the Talon grips. Love the rubber surface.

Working construction my hands are always dry. The talon stick on grip is a huge help in controlling my shots.

I absolutely love these grips. My P2000 polymer grip was fine, but a tad slick if you have cold or wet hands. With the Talon grips, it's soft and almost sticks in your hand. Very comfortable. Also bought them for my wife's M&P Shield 9mm, and same story there. The polymer grips on those leave a lot to be desired in my opinion. Very slick. Quite an improvement by adding the Talon grips.

I really like these grips. Here in the desert Southwest it gets extremely hot and humid. Your hands sweat, but with these grips there is no slippage.

The Talon grip allows flat bottom mags to be used in my .40 P2000 without shifting my grip after several rounds.

They were a perfect fit. Very Grippy

They are a great addition to a duty carry gun. Unfortunately I only had them on for two weeks until I had to be issued a new service gun. I need to order myself another set!

As a professional law enforcement officer I'm always on the look out for products that will give me an advantage. These grips are affordable and easy to install they give me the extra grip needed to improve my abilities and give me a bit more confidence when handling my sidearm.

Awesome grips. Really help you keep the gun firmly in your hand.

The P2000 grip is slightly small for my hand. The Talon Grips gave me the extra dimension I need to get the gun to point properly. Great for humid/rainy conditions.

Great grip, fits perfectly as described.

Greatly improves the comfort and functionality of the pistol.

Outstanding product!

Stellar product, plug and play ease of installation. I find my self not having to readjust my grip. + Made in America = a life time customer.

Was very impressed with the Talons i put on my Glock 23 so im pulling the trigger on grips for my HK as well. Great product and fair price.

Perfect fit as usual. All of my firearms have Talon Grips.I am a customer for life.

Unbelievable best grips I ever owned keep up the the good work