IWI Tavor Pistol Grip

TALON Grips for IWI Tavor Pistol Grip (Black Granulate)

Grips for IWI Tavor Pistol Grip



90 days

Order in the next 44 hours for Monday shipping!

TALON Grips for IWI Tavor Pistol Grip. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage, and high coverage on the front and backstrap. FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

These applied so easily and nicely that I felt like an expert. I really like the way the grip feels. Highly recommended!!

I was very impressed with the design and ease of application of the Talon Grip. I am familiar with die-cut products from my career in manufacturing and packaging and this is the simplicity of perfection for a simple yet very effective firearm grip.

As expected fro a previous order, excellent quality and fit for my Tavor, both pistol grip and forend.

I like the added sticky feel of this grip. Really adds to the weapon system. Easy to install!

I got the Tavor pistol grip and the fore end grip. The black looks awesome on my FDE TAVOR. These are great products! They are also very reasonably priced.

Awesome! Haven't shot with it yet but I know it will be great. Much better purchase on grip. If it performs like the Talon grip on my SR9c, amazing!

Just installed the X95 pistol grip rubberized Talon Grip. To make this easier, remember to take the grip off the rifle by removing the large Phillips bolt from the bottom of the grip. The black rubber looks great as a contrast to the FDE of the riffle. I removed the top wrap around piece for the finger groove because I think it looks better that way. Easy to install and very functional.

I have a Talon grip for my FNX45 and love it, so I got one for my Tavor. I have used the Tavor in both Israel and the US since the early 2000's, and I am always looking for ways to improve its functionality. The Talon pistol grip was an excellent addition. I use a vertical foregrip but will be looking for a way to bring Talons technology to that as well.

Love the grip exactly what I needed for my Tavor. Super easy to install and the black looks awesome one my FDE. If you have a Tavor get one of these

Love these grips. I have them on my Beretta Nano and Tavor X95. They improve my grip 10 fold. Great job! :)

A little more difficult to apply than other Talon Grips that I bought for different weapons but I think that is more due to the design of the grip on the rifle than of the Talon Grip.Works excellent though, Talon makes a very good quality product.

Terrific. Bought two, one for my Tavor and one for a friend. Mine's black. His is tan. Looks/works great on both. Easy to install as the cutouts help placement. Got them on a Glock, a sccy, a XDs, and two Tavors. My AUG is next.

The Talon rubber grips greatly increase the grip and control of your firearm. It's a great enhancement to any firearm

Talon Grips are like your favorite recipe. you can make it like the recipe and have a great dish, like the standard Talon grip. Or you can add to the recipe and make it your own. I happen to like complete no gap grips so I buy extra bulk material and use it to "customize" my grips . My Tavor has seen this as I replaced the original fore end with a Mid West Industries extended fore end . Talon does not make a grip for that , but 2 sheets of bulk material and I have a great custom grip. Both my Glock's also have Talon grips and are just like glue to hold with or without gloves. These are the best rubberized grips I have ever used. Thanks Talon. I'm almost sorry I don't have more guns so I can buy more grips.

Love your product I have it now on all my firearms. I recomend them all the time to friends and family and new people in the sport of shooting. This recent purchase was for a friend. Only thing I would like to see is the rubberized grips come in other colors. I.e. FDE, OD , grey etc. would like to get a rubberized pink for my wife's Glock 19. I thought I found some when I went to the local Glock store but it was the pink sand paper not the rubberized. Keep up the great work.Thanks Darren

These are a must for this weapon! They make a so so factory grip much better! Thanks

Consigliato anche ai miei amici

Great product, I got the rubber. If you follow the instructions on the sheet and web site, it is easy to do and turns out Great. I still would like to see the IWI Tavor foregrip and pistol grip as a kit, you really should do both......

Ordered both granulate grips to use on my bedside Tavor. The texture the grips come with I find to be too rough for regular use, but are perfect for my needs as I definitely get extremely sweaty hands waking up in a sudden panic

Easy install if you take your time. Have had them out in the rain and it made a huge difference from the stock plastic when wet.

Excellent addition!!!!!

Easy install and lined up perfectly. Strong, comfortable grip. Definitely glad I purchased it.

The added rubber grip on the Tavor's pistol grip is a must-needed upgrade. Feels great in hand and adds control and stability. Don't have to worry about slippage. Five star product, it will only make your firearm better and that much fun to shoot.

The Talon grip works great on the Tavor! The Talon grip aids in controlling the weapon during firing and followup shots. As an added bonus, it does look cool (which we all know, you want to look cool while shooting). Great product, highly recommended!!!

Much better grip traction

The Talon Grips for my Tavor are great ... Just what I needed .....

This grips looks so flush, it looks like it came with my rifle. The texture is so nice to grip, it definitely made the tavor a lot better.

Easy to apply, durable, completely functional and my TAVOR looks even more badass than it did before...and it's not easy to make a badass TAVOR look even more badass....but TALON can do it!!

Love it! Feels great and looks AMAZING

Excellent fit, appearance, and grip. A very practical and worthwhile addition to the Tavor.

Like all Talon products they are 1ST class! Talon is a pleasure to do business with, great customer service!!

This product is outstanding. These grips went far beyond my expectations. The rubber texture glues the IWI Tavor's pistol grip to your hand and makes an incredible difference. The rubber is very close to the colour polymer of the Tavor and doesn't look grey like some of the photos on here would make it seem. I bought the extra strip for the front of the trigger guard and it looks great as well. Thanks Talon!

I think you should include a small cutting tool,otherwise, product is great

Great addition to the Tavor. If you have aftermarket selector levers, you might have to trim a small part of the grip for clearance. Otherwise easy to install.