Shockwave Raptor for Mossberg 500/Remington 870

TALON Grips for Mossberg 500 Series and Remington 870 pistol grips (Granulate Texture)

Grips for AR & AK (Long Guns) Shockwave Raptor Grip for Mossberg 500 Series and Remington 870



90 days

Order in the next 23 hours for Wednesday shipping!

TALON Grips for Shockwave Technologies Mossberg 500 Series and Remington 870 pistol grip. This grip is available in both granulate and rubber textures and offers full 360 degree coverage. FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

Easy install. Phenomenal grip. No issues whatsoever. Fit and finish are above and beyond expectation. Thanks!!

installed easy , working very well so far

Made a good product great. Thanks.

Very comfortable and really increases control over the stock slick grip

As with all of my other Talon grips-fits great and easy installation. Just the right amount of grip without adding bulk.

Fits like a glove on the Mossberg Shockwave and is definitely needed on that beast--see Hickok45s youtube video if you don't believe me ;) I got the rubberized grip and couldn't be happier with it.

I've purchased many Talon Grips now for multiple guns. Just as expected, a perfect fit as usual. Thanks Talon!

These grips will give you added confidence when firing your shotgun. I put my grips on reverse as shown, what they show as top I put on bottom because that is the only seem I have, works great. You well need more patience and time on this grip set. There are a number of cut pieces that you will need to work out to smooth out your grips. It will be worth the effort.

Seems like the grip could have been cut to get closer to 100% coverage or even a little more overlap, but overall very happy with the fit and added traction. Pretty easy to install and good directions.

Followed the instructions exactly. Took my time working the decal carefully around the Shockwave grip. When done, heated the grip several times with a hairdryer. The Talon grip looks to be on for good. Time will tell. My brother has a Talon grip on his carry pistol and has had good luck with it. Even in the heat of The Texas Hill country, he's had no issues with the Talon grip coming loose. I expect the same from this one.

Easily installed if you follow the directions, and they make a significant difference in the controllability of this weapon.

A necessity for the tac 14. Great product.

Another great product from Talon. Easy installation. A must have on the Shockwave.

Awesome product! Initially bought this grip just for my Mossberg Shockwave, but I liked it so much I bought a set for all of my Glocks. The rubberized texture is very comfortable and feels good against the skin when concealed carry. Every grip I received fit perfect and I expect to buy more. Thank you Talon Grips!

Perfection love these products

I ordered the Rubber grip for my Mossberg Shockwave and it's awesome. Super easy to put on if you just take your time. I hadn't fired my gun until I put on this grip, and I am glad I waited. I definitely didn't want to "bite" the webbing near my thumb with the gun's safety. Comfortable, and looks great!

Easy install, fits perfect and does what it's supposed to. Buy with confidence.

Perfect fit, makes shooting it even more fun. Very good grip no slipping even with magnum loads!! Highly recommended Talon products!!

Fits my Shockwave like a glove. No more slippery grip.

Great fit! Definitely made the difference in performance. I bought the granulated texture. Highly recommend! This is my 4th purchase from Talon Grips. Great job guys!

Works great. Give you that little extra grip that makes a difference

Very surprised to see this. Perfect fit as are all my Talon grips. I buy them for all my firearms.

Perfect fit. Just like all my Talon grips. Easy to install.

Really helps to hold on to this little shotgun a great accessory have talon grips on other handguns also it has helped me to learn to like plastic guns LOL

The fit on these grips was great I bought the sand paper type and they really add a lot of control to this weapon. The rubber type may be a better choice for the Shockwave as 3 inch shells tended to rough up my hand but as always the fit was great ! 5 stars

The rubber version helps me hold onto the Shockwave when I fire it. The recoil is stout but this grip wrap "glues" your hand to the Raptor grip.

Simply outstanding customer service, fast delivery and perfect fit!

If you have a Shockwave equipped Mossberg or Remington 12ga., you must have the Talon grips.

I am most impressed with Talon and the product.

A MUST HAVE for this shotgun. Great quality, fits perfect. Installs easy, improves 'feel' exponentially.

This is my first Talon purchase. I love the grip and learned of them on Hickok45. I expect to make future purchases for other firearms.

This product is fantastic for the shockwave! Gives you the extra traction needed to tame the recoil while shooting buckshot or slugs! On this gun I prefer the rubberized texture

The grips work great. I actually have a Mossberg Shockwave, but it's the same grip. The grips were very easy to install and stick very well to the plastic of the raptor grip. I liked them so much I am about to purchase some more talon grips for some of my other firearms.

The rubber-black Talon grip for the Shockwave has been an excellent addition. The rubber provides a small amount of cushion and really adds to the grip in humid and other damp conditions. Pre-cut pattern fit perfectly and instructions were very clear for a no-issue self-installation. Only minor issue was the rubber-black appears more as a dull grey, rather than a true black, so it doesn't exactly match the Shockwave grip color. However, that only really shows up under bright light conditions and again is only a minor appearance issue. Highly recommend for both Mossberg 590 Shockwave and Remington 870 TAC-14 owners!

Fits very well on my 590 shockwave. Nice quality and workmanship as expected from Talon. Follow the instructions,take your time, and you will have no problem installing these.

Must have accessory for your raptor grip-equipped firearm. Easiest installation of any talon grip to boot.

Very nice product. Just the right texture. Helps alot on the shockwave.

I was glad to see that Talon Grips had these for the Mossberg Shockwave so soon. The Shockwave, being a 12 gauge weapon, I could see that any recoil push back would have to come through the grip. The first time I shot it the recoil was not bad or unpleasant but I could see that a sweaty or wet hand on the bare rapture style grip could cause the weapon to slide back on the grip when firing. Well worth the money and short time to install for better weapon control.

Great product - just like all of your handgun grips. Easy to apply. Instructions MUST stress the need to thoroughly wash the Mossberg Shockwave stock with alcohol prior to application of the Talon Grip. Also need to stress using a heat gun several times to assure perfect adhesion.

Perfect for the Shockwave! I have Talon on all six of my Glocks and considering how the Shockwave is set up Talon was a no brainer. Greatly improves the grip and makes it a much safer and more accurate firearm. Highly Recommended!

Excellent fit...outstanding product!

I know your previous grips that I have purchased have all been cut in a singlre piece. I think the shockwave grip is better served by being a 3 piece design.
1. Blackstrap with darts to accomidate curvature.
2. Left side with bottom finger darts.
3. Right side to meet left side fingers.
I'll use them but I find them a little less attractive than a combination of 3 shapes would be.
I resorted to the 3 piece solution when I screwed up the one piece attempt. Too many contours on the shockwave grip to use a one piece pattern. (I think) best regards, Gary

This is the best addition you can buy for your Shockwave. It is just "grippy" enough to improve on the Raptor grip. You have to have one of these!

Works perfect for my new Shockwave. Easy install and adds the perfect amount of control on the Raptor grip. If you have a Shockwave, you need this grip. Looks cool too!!