FREE SHIPPING! *

Sig P226

TALON Grips for Sig Sauer P226 with Black Polymer Factory Grips (Rubber Texture)

Grips for Sig Sauer P226


 

$17.99

90 days
+

Order in the next 53 hours for Monday shipping!

Sig P226 with Black Polymer Factory Grips or Ergo/ E2 Grip. This rear wrap grip is available in both granulate and rubber textures and offers full side panel coverage including the thumb rest area, full coverage under the trigger guard, and high coverage on the backstrap. The Polymer grip has a graphic cutout for the Sig Sauer emblem on one side and the P226 on the other side. Please note that this is the polymer grip with the exposed screws on each side, click here to see the firearm on the Sig Sauer website. The E2 grip has a graphic cutout for the Sig Sauer logo on each side. Please note that this is the E2 grip without the exposed screws on each side, click here to see the firearm on the Sig Sauer website. FREE SHIPPING!*

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty


Awesome grips for any duty weapon!


Tried granulate, were great - then rubberized, not so great. Went back to granulate. I just needed to cut out small part where my thumb comes down when gripping gun in holster. Was tearing up my thumb area. Excellent product. Carry OWB concealed with no problem.


Perfect


I bought these grips after I began competing IDPA, After shooting matches for hours in the hot sun my hands became too slick and I wasn't getting a good hold. Thankfully I found these grips, they are cut perfectly to fit and look like they came from the factory like that. Now no matter the conditions (I live in the Pacific Northwest) I always have a good hold in the rain and sun.


Fit great - simple install. Grips much better than the plastic on MK25.


I've used talon grips on Glocks and Barettas and they worked great. This time they did not adhere to the Sig E2 grips. I followed directions exactly(as I've done before with other guns) and the talon wrinkled up during dry fire practice and I had to remove them. Very disappointed as I never even got to use them at the range.


I have been using this grip on my Sig Sauer P226 with E2 grip for a couple of years and really like them. They fit the gun perfectly and provide a great purchase. I have had them get a little loose on really hot days when I am on the range for a class or match for 8 hours. I recently put a new one on and shot a 2 day course of 1000 rounds since it was new and still really "sharp" my word they were a little rough on my hands but that was extreme use on a brand new grip.


I purchased these for my 226 RX. I love the E2 Grip. Right after I finished using the heatgun on the grips I had a terrifying thought. Did I just mess with perfection?
200 rounds later at the range, the answer was No. These Talon Grips created perfection. I purchased the rubberized grips because I have soft hands and enjoy shooting a lot. I let the range master go through a couple mags too and he commented how great the grips were too! Love these grips!


The Sig 226 grip will fit on the Arex: Rex Zero 1 Pistol almost perfectly. Had to snip a tiny bit off where the slide release lever on the left side sits. Very simple. Excellent grip.
Don't hesitate to buy!


Easy to install and very effective. I'd definitely buy again.


hi quality product


The grips were easy to install and a great fit. The customer service was excellent. I would definitely recommend to others.


Bought a Sig 226 MK25 with plastic grips. Changed to Houge rubber grips and they were simply to wide. Solution was Talon over the OEM plastic. Right feel and right width. I'd highly recommend trying these before spending $100+ on after market grips.


Got it for my 226 tac ops and was concerned but it worked out great


Fit my tacops great and adds a good amount of grip


Great item! Grip is excellent!


Easy to install feels great .


Super simple to install and made my grip so much more secure, i will he adding these to most of my guns instead of spending tons of money on a high end grip you may not like.


I purchased the Granulate grips for my Sig 226. I am very please with the grips. They are much more aggressive that the Talon rubber grip I have installed on other hand guns.


I own Talon grips for my FNX-45 Tactical and love and rate them excellent. I can only imagine if I bought these they would only be very good. The reason is because after installing the grips you cannot access the grip screws. Add cutouts for the grip screws and FDE color and I would buy them.


The rubberized Talon grip that I got for my Sig P226 was easy to install, and has really improved the feeling and handling of my pistol. It is important to really use the alcohol pad to prep the grip before installing the Talon grip, and take your time to really line the material up before you apply the heat.

The rubberzed grip works better for IWB carry, and a properly installed Talon grip doesn't interfere with the draw action from the holster. This product makes any pistol better!


The grip fit my 226 perfectly and they are easy to apply. There is one part of the grip that I trim away as it is too aggressive under my strong hand thumb making it difficult to manipulate the slide release.


This is my target pistol, I shoot the most. I love rubber grip on all my AR-15 and other pistols


Outstanding grip. I have on my Sig P320 and P226. Very secure in hand, I have used a lot of different grips while on the sheriff dept.. Believe me Talon Grips is where it's at. I like the rubber texture. Excellent customer service. Thank You.


Went on easy, gives a good grip. Only problem is I may have ordered the wrong one because there was a little excess material. Overall though the grip still works great.


Awesome product!!


Third time buyer! The grips are amazing... easy to put on and a perfect fit! Two Shields and a Sig Sauer. The guns feel great in my hands. Friends of mine agree.


My Sig P226 was the first true combat and tactical gun I was issued in the Navy and it was love at first sight. Now as a Veteran, it is the only gun I trust for home and self-defense, but due to some disability (I thinks is age) I was told I developed in my hands, I needed something that helped me hold it tight, but rather than to add any exotic or wooden grips that seem to take away its looks and low tactical profile I decided to look for alternatives. Talon grips is the solution to my problem and now I can hold my gun tighter than ever before. Excellent product and works as described that I'm putting it in all of my other guns and AR's.


Love the granulated grip. This is on my duty gun and I love knowing the gun is locked in my hand. Rain, snow, sweat, blood, nothing makes me lose grip because of this thing.


Will definitely be coming back for more of these grips for other pistols in the future. This is huge upgrade to any polymer/plastic grips. The gun sticks and stays in my hand.


Yes have to state that the rubber Talon grip for my SIG x-Five all round is fantastic, provides an assured and consistent grip each time, I prefer the rubber version to the other option that is available, thank you and well done for a great design.


Bought this to install on my Sig .22 which is a reduced sized Sig 226. With a little patience and a little trimming it fit great.


Works really well. easy to install and really makes a difference.
Not the last time i have purchased either, from this site. fast delivery and small things in the package makes one feel like a valued customer, no matter how small the buy :)


I'm not a fan of SIG at all. I am forced to shoot a 226 for work. The 226 has grips that get very slick when your hands get wet or sweaty. The Talon grips make the 226 tolerable to shoot.


Excellent grips. Customer for life. Thank you


Best Grips On The Market, Hands Down !!!


The Talon grips for my P226 make a big difference in my ability to mitigate recoil. I wouldn't shoot the P226 without them.


Excellent fit. Easy to install. Perfect accessory for a Combat Pistol. Ensures solid grip.


they are working very well on my sig tacops 226 thx


The rubber grip has a nice feel and applies easily. The only cons that I did not like or think it would be nice to have is where the screw holes go to have a spot on the other side marked for the user to cut out or maybe given that option to order it with screw holes. Also once the grip tape is on and applied you cannot remove your grip for inspection or cleaning of your grip. I think that the grip design should be re-designed for the use of the technician to clean and inspect their grip (if they are in need of doing that) overall for the price and purpose it does the job.


The rubber grip has a nice feel and applies easily. The only cons that I did not like or think it would be nice to have is where the screw holes go to have a spot on the other side marked for the user to cut out or maybe given that option to order it with screw holes. Also once the grip tape is on and applied you cannot remove your grip for inspection or cleaning of your grip. I think that the grip design should be re-designed for the use of the technician to clean and inspect their grip (if they are in need of doing that) overall for the price and purpose it does the job.



Excellent product and value. The only thing I would suggest to others is always have a spare set. That way if you have to armour your pistol you will be able to put another set on without delay.


Excellent product and value. The only thing I would suggest to others is always have a spare set. That way if you have to armour your pistol you will be able to put another set on without delay.


terrific job on my P226 saved me from buying some hogue's ,,, great product !!


holding the weapon is easier so much so with fast draw. Your shooting hand stays in place after recoil and easier to maintain sight at target. Cons, No FDE available.


I have applied four of these grips on different firearms and have been generally pleased really. The most recent one for my P226 is having problems adhering to the web of the grip which I am annoyed with. I followed the application instructions to the letter and I'm meticulous about detail. I even wore latex for the whole application but the web just won't stay adhered on the curvature on the top portion of the contact point on the web. Can you ship me another one so that I can OCD the shit out of the application?Thanks,Matt




Installed your grip on my P250 Compact .380. Makes a comfortable grip even more comfortable. Can't wait to put them on my new XDs9 & Glock 30S