Gripster for Yeti Ramblers and Travel Mugs

TALON Grips Gripster shown here on 20 oz YETI Rambler Tumbler

Gripster for Yeti Ramblers and Travel Mugs



90 days

Order in the next 5 hours for same day shipping!

The GRIPSTER is a mixture of a TALON Grip and a Coaster. The Universal Gripster fits most travel mugs and measures 2 11/16" in diameter. YETI Gripsters fit the 10 oz Lowball, 20 oz Rambler, 30 oz Rambler, 36 oz bottle, 16 oz Stackable Pint as well as the Colster. If you like hot drinks HOT or cold drinks COLD the YETI Ramblers are perfect unless they scratch your wife's coffee table (true story). With this GRIPSTER you can stop the scratching, reduce sliding, or install a stylish decal on the side of your Rambler to let people know that you support two great companies! One GRIPSTER is included with this purchase as well as FREE SHIPPING!

Link to YETI Ramblers

  • 100% made in the USA
  • Custom designed and manufactured for this specific firearm for an OEM quality fit and finish
  • Low profile grip adds minimal bulk/size
  • Available in granulate texture - Often referred to as sandpaper or skateboard tape, this provides positive grip on the firearm and best suited for holster carry and competition shooting.
  • Available in rubber texture - This textured rubber grip provides positive grip on the firearm and is more commonly used for concealed carry (less likely to irritate skin or snag on clothing) and users with softer hands.
  • Easy to install within minutes (proper installation requires a hair dryer or heat gun)
  • Instructions and cleaning pad included
  • Most cleaning solutions do not harm the grip, but avoid aerosol based solvents like CLP.
  • Adhesive will not move once properly installed and can be easily removed with little to no residue.
  • 30 day refund for return of unused product
  • 90 day warranty

Great product like everything else they sell. I previously ordered a tumbler grip and 2 pistol grips. I will be purchasing from this business again!

They work great! Got one for all my YETI cups.

I don't have the Yeti mug, I'm using a Sam's club mug instead. This fits perfectly since the mugs are the same size. Now when I set the mug down its not so loud. The wife was complaining every time I set the mug down during my morning coffee because she was tired of hearing that clunk when I set it down on the granite counter top. Happy wife, happy life.

Works great with a Yeti tumbler much better feel to put it down on a rubber bottom. I would recommend them.

Love the product

Super easy to place. A little bit fragile around the E and can tear easily. Doesn’t scratch furniture though!

well i would rate this but it wasn't in the order, with the other talon grips. so if you will send ill rate

These are table savers! No more dents in the wood table.

Excellent product and easy to employ

The only issue with it is that the very small space between the letters in “YETI” is tough peel off the backing and set on the cup without tearing and getting it lined up straight. Not to mention, if I were to put it on a cup that isn’t made by “Yeti” it won’t line up right. If it weren’t for that, I’d give it a full 5 stars. It’s amazing and I love it. I plan to buy more in the near future.

This is the fifth one that we have purchased. They are worth the price and the customer service is excellent.

Most people get the process completely backwards -- they buy a Yeti mug and then head to Talon Grips to buy a Gripster. In my household, we first buy the Gripster and then buy a Yeti product to go on top of it! After all, I rely upon Talon for grips on all my concealed carry pieces -- so I certainly rely upon them to keep my Yeti mug in place!

Great product. Perfect fit for my Yeti tumbler. Also decent fit on another off-brand tumbler. It has stayed securely attached through dozens of dishwasher cycles, with not even the slightest separation at the edges. The material is great too; it's firm enough that it doesn't affect the stability of the tumbler, yet just soft enough to keep from scratching anything. I love this product and although it is simple, it's a good solution and is one of the most reliable products I own. I also appreciate Talon keeping the shipping reasonable and not charging a full box rate.

Love this stuff. Please make gripsters for all the Yeti products.

Fits perfect. I have them for all of my yetis. easy to install. i always do the hair dyer (or heat gun) method, so i do not know of the awesomeness done the other way. has survived many, many, many washes and has not had any issues. in my opinion, yeti should have had these on their cups from day one.

Worked fine on my Ozark trail tumbler.

Love my gripster for my yeti 36oz bottle and 30 oz tumbler. Nonslip good grip non scratching and looks good.

Awesome product.... highly recommend

Great product, helps the Yeti grip the any surface you put it on....

Great gripper for my coffee mug! Works great just like on my gun.

Good grip but to thin also I think it should cover the sides of the cup

These are great for the bottom of my yeti and ozark trail tumblers but they need to be just a tad bigger to cover the bottom completely after you heat it up and press it in all the nooks and crannies.

Purchased a few of these for s friend. He loves them! I have one of these on every Yeti I own.

The Talon Gripter for Yeti Ramblers are awesome. I have 4 of them and will be getting more.

Love the product! Works great!

I have made multiple purchases over the past couple years. Some for me, some as a gift. Simple: You buy Yeti cup........YOU HAVE TO ADD THIS ON! It is not a question if......It is mandatory! Keep up the great work fellas!!!!

Really, really like this product. Now make ones for the wine tumbler and 14 oz. mug.

Cool way to accent your Yeti

Have one on my 30 oz. Loved it so much had to get one later for my lowball. Quality product,even survives the dishwasher. Bulletproof.

My yeti sticks like glue to any surface. Does not scratch surfaces. Love it.

Can’t beat the talons. All other grips for bottom of Yeti are to thick makes rambler unsteady. Talons perfectly thin and grippy. If you have ramblers or anything same roundness get the best get talons

Love these! Easy to apply, protects the bottom from scratches and doesn't clink when I sit my tumbler down.


Put this on a Yeti Colster, perfect fit. Need one for the body of the Colster. These things are very, very slippery. With the weight of a brewski in it they just want to slide right through your fingers. I ended up stretching a band of bicycle inner tube around it.

Love them. Should have ordered 4 more!

Perfect fit and function. Easy to install and does exactly what it is supposed to do. Great product.

Works great, helps protect wood, etc when you set down your drink.

My wife and I love these things. We have them on all of our Yeti stuff. No more scratches on the table.

Makes a great product even better.

The best as always!

Easy to apply, works great to protect surfaces from scratches left by mug, and works great to give solid hold an an uneven surface so mug doesn’t slide off

I am using this on an Orca 27 ounce coffee mug and it works great. Prevents that 'clang' when you set your cup down and keeps it from sliding around so much on a table or desk.

Have them on all my cups!!!!

Love ❤️ this grip. Told everyone at work about it. In fact next time I see the lady in charge of novelties sales I'm going to turn her on to this grip because we are Yeti dealer. You guys are the best. I still owe Mike Morris some dimensions for a quote for my coolers.

I got three of these for my Yeti's and they work awesome!

First of all, I love that the Yeti cutout fits perfectly with the stainless steel stamped Yeti lettering on the bottom of the tumbler. But I also love the material used for these gripsters, it's higher quality than plain silicone. They give you an alcohol pad to clean the yeti bottom and instructions on putting it on; it's a high quality product, really

They work great. Mainly I can tell my drink from my wife's. But I'm amazed at how well they stay on even after many washes.

Just like everything else I get from Talon this is exactly what I wanted and works perfectly. Keep up the good work

I have one of these on every Yeti I own. Fits great!!

Love it make more products for Yeti coolers


This product is a must have! Simple installation and it does exactly what is suppose to do.

Works great!!

A grip, a coaster, and even a hipster statement. Adhered perfectly and is fully water/heat resistant. Highly recommended. Thank you.

Makes a great product even better!!!

Best thing for the cooler. My wife was surprised how it really GRIPs her cooler. She loves it .

Easy institution (Same for my Glock pistol). Works like a charm.

This is the only way to make a Yeti better.

This is exactly what I was looking for. Softens the thud of the metal cup, and it's got great grip on top of my vehicle. Thanks!!

I put this on my yeti coffe mug for side grips. Gonna get a second one also for the other side. Works great!

It works great! It helps prevent sliding on my counter and desk.

I've ordered gun grips and every yeti grip offered. Love them and it's the best deal out there.

This makes a great product perfect!

Nice my yeti is not moving anywhere great gob

Great item, makes a great addition to my colster!

Love the quality and service of Talon Grips. A great addition to my YETI. We have Talon Grips on all of our "plastic guns" as well. Try 'em, you'll love 'em.

I placed mine on the side of the yeti instead of the bottom for increased grip on the side when the cup is wet. When I applied heat to it it took the shape of the cup instead of just a big round dot! Looks really good and easier to grip the cup.

great fit, nice addition to the yeti cups

I'm so pleased with this product! It is exactly what I wanted. I have the Wally cup and it fits perfectly. I used to be so careful setting my drink down on a hard surface because it was so loud and disruptive in meetings, now it just sits down quietly and doesn't move. Thank you for a quality product!

Love this grip for my Yeti cups. I have this grip material on everything. You guys really need to look into making a grip to fit my(a) Yeti 35 cooler lid. Super non skid and dam good looking to boot. Your product is so versatile. Come on guys pull the trigger it will sell. Keep up the sterling work and God bless.CheersShawn

The Talon Grip I ordered for my 20oz Yeti tumbler is Awesome!! Tumbler no longer slides all over when on tables plus I don't need to worry about scratching tables or counter tops.

Love your products. Only complaint I have is that the size could have been slightly larger to round the bottom edge more. It looks like it's big enough until you hear it to form it. Other than that, great!

All is good

The "coaster grip" is a perfect fit for both the Yeti & Wally's version of the same. A great accessory I am grateful to have found.

Awesome addition to a Yeti! Great company and customer service. Thank you for the hand written thank you note on's really a nice touch!!!

Just as advertised, I use them on the boat offshore fishing and i love the fact i can set my colster down on the center console without it sliding, even on a wet surface. Easy install, high quality! Just got one for my rambler too

This is the best Yeti add-on period! My only grief is everyone is more blown away by the talon grip then my custom Photoshop logo on my cup!

Perfect for the Yeti Colster and all the tumblers EXCEPT the 10 oz. The 10 oz is larger than the others. Wish I had realized that before I purchased, but that's not a reflection on the product.

Love the Gripster for the Yeti Rambler how about one for the low ball and the can those should get one to.

Awesome product!

The grip is a great addition to any of the Yeti products. It cushions and quiets it when you set it down. And it doesn't slide now.

I bought 2 to try and now this order completes what I need to install on all the family's cups.

Really does make a great product even better. Outstanding fit and finish. Can't wait for the 64oz Rambler Bottle version.

After putting Talon on my Glock 43 I had to try them on my Yeti's. Al four Yeti's have Talons and I love 'em. Looks good, functional and they are just neat! And you sure can't beat the price!!!

Makes cup quite, nonslip lots of commitment from others. Recommend

Perfect solution to my problem.

The Grip gives the Yeti a much nicer feel when setting it down on a table. Happy with Talon Grips!

Share with far has to be the BEST Yeti accessory on the market. Love the product.

Best addition to tumbler, it stays in place on slick surfaces now

Gives any of the hand held Yeti Tumblers/Glasses a non slip bottom. Keeps your Yeti's from scratching glass or soft wood surfaces. I've washed our Yeti's repeatedly & the Talon Bases haven't loosened.

These gripsters make our Yeti drink containers perfect. No more scratching our glass & hardwood tables. They also provide a little traction in the car cup holders. Highly recommended. We have them on all of our Yeti products.

Awesome idea. It's basically a built in non-slip coaster. Works great on my wood desk. Thanks TALON!

I love it, keeps my yeti from scratch and clanking on tables!

Fits a Yeti 30 oz., 20 oz. and drink "coozie". Works awesome. No more clanging on granite counter or worrying about scuffing the table.